Juniper Netscreen25をPPPoEで繋いだ時の記録

set clock dst-off
set clock ntp
set clock timezone 9
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "root"
set admin password "*********************"
set admin manager-ip 192.168.11.0 255.255.255.0
set admin auth timeout 10
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst 
set zone "Untrust" block 
unset zone "Untrust" tcp-rst 
set zone "MGT" block 
set zone "DMZ" tcp-rst 
set zone "VLAN" block 
unset zone "VLAN" tcp-rst 
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet1" zone "Trust"
set interface "ethernet2" zone "DMZ"
set interface "ethernet3" zone "Untrust"
unset interface vlan1 ip
set interface ethernet1 ip 192.168.11.1/24
set interface ethernet1 nat
set interface ethernet2 ip 192.168.1.1/24
set interface ethernet2 nat
set interface ethernet3 route
set interface "ethernet1" pmtu ipv4
set interface "ethernet2" pmtu ipv4
set interface "ethernet3" pmtu ipv4
set interface ethernet1 proxy dns
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet1 ip manageable
unset interface ethernet2 ip manageable
set interface ethernet3 ip manageable
set interface ethernet3 manage ping
set interface ethernet1 dhcp server service
set interface ethernet1 dhcp server enable
set interface ethernet1 dhcp server option lease 1440 
set interface ethernet1 dhcp server option gateway 192.168.11.1 
set interface ethernet1 dhcp server option netmask 255.255.255.0 
set interface ethernet1 dhcp server option dns1 129.250.35.250 
set interface ethernet1 dhcp server option dns2 129.250.35.251 
set interface ethernet1 dhcp server option wins1 192.168.11.1 
set interface ethernet1 dhcp server ip 192.168.11.2 to 192.168.11.220 
unset interface ethernet1 dhcp server config next-server-ip
set interface ethernet1 route-deny
set flow all-tcp-mss 1304
unset flow no-tcp-seq-check
set flow tcp-syn-check
set hostname Firewall
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set dns host dns1 0.0.0.0 src-interface ethernet3
set dns host dns2 0.0.0.0
set dns host dns3 0.0.0.0
set ike respond-bad-spi 1
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set url protocol websense
exit
set policy id 1 name "Permit_Service" from "Trust" to "Untrust"  "Any" "Any" "DNS" permit 
set policy id 1
set service "FTP"
set service "HTTP"
set service "HTTPS"
set service "ICMP-ANY"
set service "MAIL"
set service "NTP"
set service "PING"
set service "POP3"
set service "SIP"
set service "SSH"
set service "WHOIS"
exit
set policy id 2 name "Deny_All" from "Trust" to "Untrust"  "Any" "Any" "ANY" deny 
set policy id 2
exit
set policy id 3 name "Deny_All" from "Untrust" to "Trust"  "Any" "Any" "ANY" deny 
set policy id 3
exit
set policy id 4 name "DMZ_Rule" from "Untrust" to "DMZ"  "Any" "Any" "ANY" permit 
set policy id 4
exit
set policy id 5 name "DMZ_Rule" from "DMZ" to "Untrust"  "Any" "Any" "ANY" permit 
set policy id 5
exit
set pppoe name "Internet"
set pppoe name "Internet" username "********" password "**********"
set pppoe name "Internet" interface ethernet3
set pppoe name "Internet" clear-on-disconnect
set nsmgmt bulkcli reboot-timeout 60
set nsmgmt bulkcli reboot-wait 0
set ssh version v2
set config lock timeout 5
set license-key auto-update
set ntp server "133.243.238.163"
set ntp server src-interface "ethernet3"
set ntp server backup1 "133.243.238.164"
set ntp server backup1 src-interface "ethernet3"
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit